Dot Hill Port Devices Driver Download

Posted : admin | On 23-04-2021



Free device driver

It is more likely that the Windows 10 auto update has removed the printer driver which used to work in Windows 7 and then at the initial stage after upgrading to Windows 10. There is no USB device shown with yellow exclaimation mark. Uninstall the USB device made the computer hung twice. I am still searching for the DOT4 port solution in the. HP 4/8 Internal Port SAS HBA with RAID and SCxxGe series HBA Driver for Windows Server 2003, Version 1.28.2.1 (B) HP NC-Series Broadcom 10GbE Multifunction Driver for Windows Server 2003, Version 6.0.60.0. Enter “Device manger” without quotes in the search box. Tap on Device manager. Right-click on the device driver and click Uninstall. Restart the computer. Refer to the link to update the drivers: Download and install drivers. Method 3: I would suggest you to disable and re-enable the USB controllers. The following steps will. Click the 'Download Now' link to download the file. When the File Download window appears, click 'Save' to save the file to your hard drive. Browse to the location where you downloaded the file and double-click the new file. Read over the release information presented in the dialog window. AssuredSAN 4004 Series Setup Guide For firmware release G222 P/N 9-14-01 Revision A January 2016 Abstract This document describes initial hardware setup for Dot Hill AssuredSAN 4004 Series controller enclosures, and is intended for use.

Dot hill port devices driver download windows 7
Printable version
Download

* RECOMMENDED * HP P2000 Software Bundle for Microsoft Windows Server 2003 x86

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Software - Support Pack
Version:3.45(2 Aug 2012)
Operating System(s): Microsoft Windows Server 2003
Multi-part download
File name:msa2000.bundle-3.45.w2k3.i386.exe (74 MB)
File name:msa2000.bundle-3.45.w2k3.i386.exe.md5sum (69 Bytes)
File name:bp001248.xml (221 KB)
This package contains operating-system-specific sets of optimized drivers and storage management software for HP P2000 G3 Modular Smart Array (P2000) products. These software bundles have been tested and released for the Software Support CD to ensure proper installation and functionality. This software bundle is built using the same technology as the HP ProLiant Support Pack (PSP), which uses HP SUM and HP software Smart Components. This software bundle is a supplement to the PSP, rather than a replacement for the PSP and may contains driver files that are newer than the latest available ProLiant Support Pack version. Copyright (c) 2012 Hewlett-Packard Development Company, L.P. Copyright (c) 2005-2012 Dot Hill Systems Corp. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Updated with the latest supported software and drivers compatible with TS240 Firmware.

Prerequisites:
CAPI Proxy

  • Install the CAPI Proxy before installing VDS or VSS providers.

VDS Provider or iSCSI VDS Provider

  • HP P2000/MSA2000 Family CAPI Proxy 2.2 or higher.

  • HP P2000/MSA2000 MPIO DSM 2.0 or higher.

  • The following hotfixes are recommended for Windows Server 2003 R2:

    • KB957910

    • KB968736

    • KB938390

    • KB943545

    • KB940467

VSS Provider

  • HP P2000/MSA2000 Family CAPI Proxy 2.2 or higher.

  • HP P2000/MSA2000 VDS Provider 2.2 or higher.

  • Each P2000/MSA2000 array attached to the host must have a snapshot license installed.

  • The following hotfixes are recommended for Windows Server 2003 R2:

    • KB957910

    • KB938390

    • KB940349

    • KB940467

Fibre Channel Adapter Kit for the Emulex Storport Driver, Fibre Channel Adapter Kit for the QLogic Storport Driver, and HBAnyware Utility

  • The driver installation with this Smart Component requires a minimum Windows Server 2003 SP1, SP2, or R2, along with the Microsoft Storport update, KB932755.

  • Apply the Microsoft Storport update (KB932755) before installing or upgrading to this version of the miniport driver. For boot installations, Windows Server 2003 SP2 install image is required first, followed by the KB update.

To ensure the integrity of your download, HP recommends verifying your results with the following MD5 Checksum values:

bp001248.xml437adf915ca0fee0f27c9ac5861b420e
msa2000.bundle-3.45.w2k3.i386.exe.md5sum1d017dbd02607eb8d1910fdd7bb652f5
msa2000.bundle-3.45.w2k3.i386.exe2cc07231c61f1d9772973d47fe2b20c8

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:

This bundle is delivered as a self-extracting executable. If you received it in this form, execute it to extract the bundle into a new folder.

Primary Installation Method

  1. Run the SETUP.EXE program included with the Software Bundle.
  2. Click the 'Install' button to proceed with the installation.
    Note: Even when selected, only software that is appropriate for the system it is being run on will actually be installed. After installation of the appropriate software, the utility will display its results, including indication of software successfully installed, software not needed for the current system configuration, and any installation failures.

Command Prompt Installation

  1. A BPXXXXXX.CMD file is also provided with the Support Pack for use in installing the Support Pack from a command prompt without user interaction. As with the HPSUM.EXE program, all software appropriate for the system it is being run on will be installed.
For additional usage information, refer to the BPXXXXXX.TXT file included in this Bundle Package.

Note: This Software Bundle is built using the same technology as the HP ProLiant Support Pack (PSP). This Software bundle is not a replacement for the PSP, rather it is a supplement.

End User License Agreements:
Hewlett-Packard End User License Agreement
gSOAP Software End User License Agreement

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Important:
Please refer to the Release Notes for full details.

Availability:
IMPORTANT: When the download is complete, read the BPXXXXXX.TXT. One or more of the components may require configuration to install properly.

The MSA Software Bundle uses the same deployment tools as the HP ProLiant Support Pack and therefore one can reference the Deployment Utilities User Guide for instructions on how to pre-configure and deploy smart components.

Notes:
Please refer to the Release Notes for full details.

This bundle includes:

  • HP Storage Fibre Channel Adapter Kit for the x86 Emulex Storport Driver, Version 1.22.0.0
  • HP StorageWorks Fibre Channel Over Ethernet Adapter Kit for the x86 Emulex Storport Driver, Version 1.11.0.0
  • HP StorageWorks Fibre Channel Adapter Kit for the x86 QLogic Storport Driver, Version 1.17.0.0
  • HP Storage x86 Brocade Storport Fibre Channel Host Bus Adapter Driver for Microsoft Windows Server 2003, Version 3.0.0.0
  • HP P2000/MSA2000 VSS Provider for Windows (x86), Version 2.8.3.27
  • HP P2000/MSA2000 VDS Provider for Windows (x86), Version 2.8.3.27
  • HP P2000/MSA2000 iSCSI VDS Provider for Windows (x86), Version 2.8.3.27
  • HP P2000/MSA2000 CAPI Proxy for Windows (x86), Version 2.8.3.27
  • HP P2000/MSA2000 MPIO DSM for Windows 2003 x86, Version 2.6.3.9
  • HP P2000/MSA2000 SES Driver for Windows 2003 x86, Version 2.6.1.4
  • HP P2000 MSA USB Driver (x86), Version 1.0.2.8
  • HP NC31xx Fast Ethernet NIC Driver for Windows Server 2003, Version 8.0.43.0 (F)
  • HP NC-Series Intel Driver for Windows Server 2003, Version 8.10.1.0 (E)
  • HP NC-Series Intel E1E Driver for Windows Server 2003, Version 9.13.41.0
  • HP NC-Series Intel E1Q Driver for Windows Server 2003, Version 11.7.32.0
  • HP NC-Series Broadcom 1Gb Driver for Windows Server 2003, Version 14.2.0.5
  • QLogic iSCSI HBA STOR Miniport Driver for Windows Server 2003, Version 2.1.4.19 (C)
  • HP NC-Series Broadcom 1Gb Multifunction Driver for Windows Server 2003, Version 6.0.22.0
  • HP NC-Series QLogic nx3 Multifunction Driver for Windows Server 2003, Version 4.0.556.14022
  • HP 4/8 Internal Port SAS HBA with RAID and SCxxGe series HBA Driver for Windows Server 2003, Version 1.28.2.1 (B)
  • HP NC-Series Broadcom 10GbE Multifunction Driver for Windows Server 2003, Version 6.0.60.0
  • HP NC-Series Emulex 10GbE Driver for Windows Server 2003, Version 4.1.355.3
  • QLogic 1GB PCI Ethernet NDIS Miniport Driver for Windows Server 2003, Version 2.0.2.1 (C)
  • HP NC-Series Emulex 10GbE iSCSI Driver for Windows Server 2003, Version 4.1.355.3
  • HP ProLiant Smart Array P700m, P711m, and P712m Clustering Support Software for Windows, Version 3.0.0.0 (B)
  • HP ProLiant Smart Array SAS/SATA Event Notification Service for Windows Server 2003 and Windows Server 2008, Version 6.22.0.32
  • HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2003, Version 6.20.0.32

Supported Devices and Features:
All HP P2000 G3 MSA arrays

IMPORTANT: When the download is complete, read the BPXXXXXX.TXT. One or more of the components may require configuration to install properly.

The MSA Software Bundle uses the same deployment tools as the HP ProLiant Support Pack and therefore one can reference the Deployment Utilities User Guide for instructions on how to pre-configure and deploy smart components.

Please refer to the Release Notes for full details.
Version:3.45 (2 Aug 2012)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Updated with the latest supported software and drivers compatible with TS240 Firmware.


Version:3.35 (31 Mar 2011)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.
This version of Software Bundle is applicable only for HP StorageWorks MSA2000 G1 and G2 storage array products. For HP StorageWorks P2000 G3 storage arrays, please use the 3.XX version Software Bundle.

Added support for HP StorageWorks P2000 G3 iSCSI (1GbE) arrays


Version:3.25 (21 Dec 2010)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Added support for HP StorageWorks P2000 G3 SAS and 10GbE iSCSI MSA storage arrays.


Version:3.05 (7 Apr 2010)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Initial product release for HP StorageWorks P2000 G3 MSA storage arrays.


Version:2.45 (2 Aug 2012)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Updated with the latest supported software and drivers compatible with TS240 Firmware.


Version:2.35 (31 Mar 2011)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.
This version of Software Bundle is applicable only for HP StorageWorks MSA2000 G1 and G2 storage array products. For HP StorageWorks P2000 G3 storage arrays, please use the 3.XX version Software Bundle.

Updated with the latest supported driver versions


Version:2.25 (15 Jul 2010)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

  • Added Brocade FC HBA Driver
  • Updated drivers to latest released build.

Version:2.15 (31 Jul 2009)

Updates Smart Components to properly support previous version detection in HP Smart Update Manager

  • Updated HP Smart Update Manager to version 3.5 to enable 'pull from web' functionality for HBA drivers

Version:2.10 (2 Jun 2009)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Updated the following components:

  • HP StorageWorks Fibre Channel Adapter Kit for the x86 Emulex Storport Driver to 1.10.1.2
  • HP StorageWorks Fibre Channel Adapter Kit for the x86 QLogic Storport Driver to 1.7.1.2
  • HP StorageWorks MSA2000 VDS Provider for Windows 2003/2008 x86, to 2.5.1.5

Added the following components:

  • HP StorageWorks MSA2000 iSCSI VDS Provider for Windows 2003/2008 x86 , version 2.5.1.5
  • HP 4/8 Internal Port SAS HBA with RAID and SCxxGe series HBA Driver for Windows Server 2003
  • HP NC31xx Fast Ethernet NIC Driver for Windows Server 2003
  • HP NC-Series Intel Driver for Windows Server 2003
  • HP NC-Series Intel N1E Driver for Windows Server 2003
  • HP NC-Series Intel N1Q Driver for Windows Server 2003
  • HP NC-Series Broadcom 1Gb Driver for Windows Server 2003
  • HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2003
  • QLogic iSCSI HBA STOR Miniport Driver for Windows Server 2003

Type:Software - Support Pack
Version:3.45(2 Aug 2012)
Operating System(s):
Microsoft Windows Server 2003

Description

This package contains operating-system-specific sets of optimized drivers and storage management software for HP P2000 G3 Modular Smart Array (P2000) products. These software bundles have been tested and released for the Software Support CD to ensure proper installation and functionality. This software bundle is built using the same technology as the HP ProLiant Support Pack (PSP), which uses HP SUM and HP software Smart Components. This software bundle is a supplement to the PSP, rather than a replacement for the PSP and may contains driver files that are newer than the latest available ProLiant Support Pack version. Copyright (c) 2012 Hewlett-Packard Development Company, L.P. Copyright (c) 2005-2012 Dot Hill Systems Corp. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.

Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Updated with the latest supported software and drivers compatible with TS240 Firmware.

Installation Instructions

Prerequisites:
CAPI Proxy

  • Install the CAPI Proxy before installing VDS or VSS providers.

VDS Provider or iSCSI VDS Provider

  • HP P2000/MSA2000 Family CAPI Proxy 2.2 or higher.

  • HP P2000/MSA2000 MPIO DSM 2.0 or higher.

  • The following hotfixes are recommended for Windows Server 2003 R2:

    • KB957910

    • KB968736

    • KB938390

    • KB943545

    • KB940467

VSS Provider

  • HP P2000/MSA2000 Family CAPI Proxy 2.2 or higher.

  • HP P2000/MSA2000 VDS Provider 2.2 or higher.

  • Each P2000/MSA2000 array attached to the host must have a snapshot license installed.

  • The following hotfixes are recommended for Windows Server 2003 R2:

    • KB957910

    • KB938390

    • KB940349

    • KB940467

Fibre Channel Adapter Kit for the Emulex Storport Driver, Fibre Channel Adapter Kit for the QLogic Storport Driver, and HBAnyware Utility

  • The driver installation with this Smart Component requires a minimum Windows Server 2003 SP1, SP2, or R2, along with the Microsoft Storport update, KB932755.

  • Apply the Microsoft Storport update (KB932755) before installing or upgrading to this version of the miniport driver. For boot installations, Windows Server 2003 SP2 install image is required first, followed by the KB update.

To ensure the integrity of your download, HP recommends verifying your results with the following MD5 Checksum values:

bp001248.xml437adf915ca0fee0f27c9ac5861b420e
msa2000.bundle-3.45.w2k3.i386.exe.md5sum1d017dbd02607eb8d1910fdd7bb652f5
msa2000.bundle-3.45.w2k3.i386.exe2cc07231c61f1d9772973d47fe2b20c8

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:

This bundle is delivered as a self-extracting executable. If you received it in this form, execute it to extract the bundle into a new folder.

Primary Installation Method

  1. Run the SETUP.EXE program included with the Software Bundle.
  2. Click the 'Install' button to proceed with the installation.
    Note: Even when selected, only software that is appropriate for the system it is being run on will actually be installed. After installation of the appropriate software, the utility will display its results, including indication of software successfully installed, software not needed for the current system configuration, and any installation failures.

Command Prompt Installation

  1. A BPXXXXXX.CMD file is also provided with the Support Pack for use in installing the Support Pack from a command prompt without user interaction. As with the HPSUM.EXE program, all software appropriate for the system it is being run on will be installed.
For additional usage information, refer to the BPXXXXXX.TXT file included in this Bundle Package.

Note: This Software Bundle is built using the same technology as the HP ProLiant Support Pack (PSP). This Software bundle is not a replacement for the PSP, rather it is a supplement.

Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement
gSOAP Software End User License Agreement

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Download driver dim power evo driver windows 7. Important:
Please refer to the Release Notes for full details.

Availability:
IMPORTANT: When the download is complete, read the BPXXXXXX.TXT. One or more of the components may require configuration to install properly.

The MSA Software Bundle uses the same deployment tools as the HP ProLiant Support Pack and therefore one can reference the Deployment Utilities User Guide for instructions on how to pre-configure and deploy smart components.

Notes:
Please refer to the Release Notes for full details.

This bundle includes:

  • HP Storage Fibre Channel Adapter Kit for the x86 Emulex Storport Driver, Version 1.22.0.0
  • HP StorageWorks Fibre Channel Over Ethernet Adapter Kit for the x86 Emulex Storport Driver, Version 1.11.0.0
  • HP StorageWorks Fibre Channel Adapter Kit for the x86 QLogic Storport Driver, Version 1.17.0.0
  • HP Storage x86 Brocade Storport Fibre Channel Host Bus Adapter Driver for Microsoft Windows Server 2003, Version 3.0.0.0
  • HP P2000/MSA2000 VSS Provider for Windows (x86), Version 2.8.3.27
  • HP P2000/MSA2000 VDS Provider for Windows (x86), Version 2.8.3.27
  • HP P2000/MSA2000 iSCSI VDS Provider for Windows (x86), Version 2.8.3.27
  • HP P2000/MSA2000 CAPI Proxy for Windows (x86), Version 2.8.3.27
  • HP P2000/MSA2000 MPIO DSM for Windows 2003 x86, Version 2.6.3.9
  • HP P2000/MSA2000 SES Driver for Windows 2003 x86, Version 2.6.1.4
  • HP P2000 MSA USB Driver (x86), Version 1.0.2.8
  • HP NC31xx Fast Ethernet NIC Driver for Windows Server 2003, Version 8.0.43.0 (F)
  • HP NC-Series Intel Driver for Windows Server 2003, Version 8.10.1.0 (E)
  • HP NC-Series Intel E1E Driver for Windows Server 2003, Version 9.13.41.0
  • HP NC-Series Intel E1Q Driver for Windows Server 2003, Version 11.7.32.0
  • HP NC-Series Broadcom 1Gb Driver for Windows Server 2003, Version 14.2.0.5
  • QLogic iSCSI HBA STOR Miniport Driver for Windows Server 2003, Version 2.1.4.19 (C)
  • HP NC-Series Broadcom 1Gb Multifunction Driver for Windows Server 2003, Version 6.0.22.0
  • HP NC-Series QLogic nx3 Multifunction Driver for Windows Server 2003, Version 4.0.556.14022
  • HP 4/8 Internal Port SAS HBA with RAID and SCxxGe series HBA Driver for Windows Server 2003, Version 1.28.2.1 (B)
  • HP NC-Series Broadcom 10GbE Multifunction Driver for Windows Server 2003, Version 6.0.60.0
  • HP NC-Series Emulex 10GbE Driver for Windows Server 2003, Version 4.1.355.3
  • QLogic 1GB PCI Ethernet NDIS Miniport Driver for Windows Server 2003, Version 2.0.2.1 (C)
  • HP NC-Series Emulex 10GbE iSCSI Driver for Windows Server 2003, Version 4.1.355.3
  • HP ProLiant Smart Array P700m, P711m, and P712m Clustering Support Software for Windows, Version 3.0.0.0 (B)
  • HP ProLiant Smart Array SAS/SATA Event Notification Service for Windows Server 2003 and Windows Server 2008, Version 6.22.0.32
  • HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2003, Version 6.20.0.32

Supported Devices and Features:
All HP P2000 G3 MSA arrays

Availability

IMPORTANT: When the download is complete, read the BPXXXXXX.TXT. One or more of the components may require configuration to install properly.

The MSA Software Bundle uses the same deployment tools as the HP ProLiant Support Pack and therefore one can reference the Deployment Utilities User Guide for instructions on how to pre-configure and deploy smart components.

Important

Please refer to the Release Notes for full details.

Revision History

Version:3.45 (2 Aug 2012)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Updated with the latest supported software and drivers compatible with TS240 Firmware.


Version:3.35 (31 Mar 2011)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.
This version of Software Bundle is applicable only for HP StorageWorks MSA2000 G1 and G2 storage array products. For HP StorageWorks P2000 G3 storage arrays, please use the 3.XX version Software Bundle.

Added support for HP StorageWorks P2000 G3 iSCSI (1GbE) arrays


Version:3.25 (21 Dec 2010)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Added support for HP StorageWorks P2000 G3 SAS and 10GbE iSCSI MSA storage arrays.
Drivers electronics line 3000 port devices.


Version:3.05 (7 Apr 2010)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Initial product release for HP StorageWorks P2000 G3 MSA storage arrays.


Version:2.45 (2 Aug 2012)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Updated with the latest supported software and drivers compatible with TS240 Firmware.


Version:2.35 (31 Mar 2011)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.
This version of Software Bundle is applicable only for HP StorageWorks MSA2000 G1 and G2 storage array products. For HP StorageWorks P2000 G3 storage arrays, please use the 3.XX version Software Bundle.

Updated with the latest supported driver versions


Version:2.25 (15 Jul 2010)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

  • Added Brocade FC HBA Driver
  • Updated drivers to latest released build.

Version:2.15 (31 Jul 2009)

Updates Smart Components to properly support previous version detection in HP Smart Update Manager

  • Updated HP Smart Update Manager to version 3.5 to enable 'pull from web' functionality for HBA drivers

Version:2.10 (2 Jun 2009)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Updated the following components:

  • HP StorageWorks Fibre Channel Adapter Kit for the x86 Emulex Storport Driver to 1.10.1.2
  • HP StorageWorks Fibre Channel Adapter Kit for the x86 QLogic Storport Driver to 1.7.1.2
  • HP StorageWorks MSA2000 VDS Provider for Windows 2003/2008 x86, to 2.5.1.5

Added the following components:

  • HP StorageWorks MSA2000 iSCSI VDS Provider for Windows 2003/2008 x86 , version 2.5.1.5
  • HP 4/8 Internal Port SAS HBA with RAID and SCxxGe series HBA Driver for Windows Server 2003
  • HP NC31xx Fast Ethernet NIC Driver for Windows Server 2003
  • HP NC-Series Intel Driver for Windows Server 2003
  • HP NC-Series Intel N1E Driver for Windows Server 2003
  • HP NC-Series Intel N1Q Driver for Windows Server 2003
  • HP NC-Series Broadcom 1Gb Driver for Windows Server 2003
  • HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2003
  • QLogic iSCSI HBA STOR Miniport Driver for Windows Server 2003

Dot hill port devices driver downloads

Free Device Driver

Port

Dot Hill Port Devices Driver Download 64-bit

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.